Cabinet Door Shop: America's Coast to Coast Cabinet Door Manufacturer!
 
Cabinet Door Shop's custom wainscotting and paneled ends.


 


Thank you for selecting Cabinet Door Shop America's Cabinet Door Manufacturer!

Home » Concealed Hinges & Pocket Door Hardware » Bore & Drill Specifications

 

Bore & Drill Specifications

Bore & Drill Specifications

Step 1: Determine Cabinet Construction
Face Frame Cabinet or Panel Cabinet
Step 2: Determine the overlay or reveal
Step 3: Choose hinge & plate

READ TAPE MEASURE TO THE NEAREST 1/16”

DO NOT GIVE OPENING SIZES

3/8” Overlay application:
Add ¾” to the width and height of the opening

½” Overlay application:
Add 1” to the width and height of the opening

5/8” Overlay application:
Add 1 ¼” to width and height of the opening

¾” Overlay application:
Add 1 ¼” to the width and height of the opening

Inset application:
Minus ¼” to the width and height of the opening

Frameless application:
Size determined by customer

3/8” Lip edge application
Add ½” to width and height of the opening


Twin doors (double doors) application
Add for overlay then minus 1/8” next take the width and divide by two (2)


DO NOT GIVE OPENING SIZES


Edge profile requiring special Bore Distance
Edges not available with Compact hinges
BC Edge 6MM
RM Edge 8MM
JN Edge 8MM
NR Edge 5MM

Bore Distance: Edge of door to edge of 35MM bore
Bore Pattern: Standard 2 1/2" to center of 35MM bore from top and bottom of a door
Specified hinge location by Face Value- Front of door while closed


71T5590 Inserta 120 degree Straight Arm
Bore Distance: 5MM
Drill Spec: 35MM 8MM
3/8” overlay 175L6660.22
½” overlay 175L6032.21
¾” overlay 175L6600.22 & 71T5590 used when 1 1/4” is added to width and height for a ¾” overlay application

71B3590 Inserta 120 degree Straight Arm with built in motion Soft Closing Mechanism
Bore Distance: 5MM
Drill Spec: 35MM 8MM
3/8” overlay 175L6660.22
½” overlay 175L6032.21
¾” overlay 175L6600.22 & 71B3590 used when 1 ½” is added to width and height for a ¾” overlay application

71T580 Press-In 107 degree Straight Arm
Bore Distance: 5MM
Drill Spec: 35MM 8MM
3/8” overlay 175L6660.22
½” overlay 175L6032.21
¾” overlay 175L6600.22

71T6580 Press-In 170 degree Straight Arm
Bore Distance: 5MM
Drill Spec: 35MM 8MM
3/8” overlay 175L6660.22
½” overlay 175L6032.21
¾” overlay 175L6600.22

71M0550 Screw-On 94 degree Straight Arm Mini Hinge
Bore Distance: 5MM
Drill Spec: 26MM only
3/8” overlay 175L6660.22
½” overlay 175L6032.21
¾” overlay 175L6600.22

71B3590 Inserta 110 degree with built in blumotion Soft Closing Mechanism
Bore Distance: 5MM
Drill Spec: 35MM 8MM
3/8” overlay 175L6660.22
½” overlay 175L6032.21
¾” overlay 175L6600.22

71T5680 Press-In 120 degree Half-Crank
Bore Distance: 5MM
Drill Spec: 35MM 8MM
3/8” overlay 175L6660.22
½” overlay 175L6032.21
¾” overlay 175L6600.22
Face Frame cabinet Inset application 175H5030.21
Panel cabinet Inset application 175H71900 (must blockout)

71B3680 Press-In 110 degree Half-Crank with built in blumotion Soft Closing Mechanism
Bore Distance: 5MM
Drill Spec: 35MM 8MM
Face Frame cabinet Inset application 175H5030.21
Panel cabinet Inset application 175H71900 (must blockout)

3/8” Lip Application
71T6580 hinge and 175H7190 plate
Required 70.6103 clip & 181.6130 spacer @11mm


Compact
33.3630 Press-In 110 degree
Bore Distance: 3MMM
Drill Specs: 35MM 8MM
Edge Mount
¼” overlay 130.1100.24
½” overlay 130.1100.23
5/8” overlay 130.1100.26
¾” overlay 130.1100.22
1” overlay 130.1110.22
1 1/8” overlay 130.1120.02
1 ¼” overlay 130.1130.02
1 3/8” overlay 130.1140.02
1 ½” overlay 130.1150.02
1 5/8” overlay 130.1160
Wrap Around
1” overlay 133.2110.02
Face Mount
1 3/8” overlay 133.0240


One piece compact
38N358B.06 hinge & plate 3/8" overlay with built in blumotion Soft Closing Mechanism
38N358B.08 hinge & plate 1/2" overlay with built in blumotion Soft Closing Mechanism

38N358C.06 hinge & plate 3/8” overlay
38N358C.08 hinge & plate ½”overlay

BLUMOTION Soft Closing Mechanism

Attachment for soft close Straight Arm hinge 973A0500
Attachment for soft close Half Crank hinge 973A0600
Adapter single application for soft close Compact hinge 970.5701
Adapter double application for soft close Compact hinge 970.6701
Spring sold separate 970.1002


  You can add this item to your quote or order.


 
 

^ Top of Page ^
home | products | about us | affiliates | search | checkout | e-mail

Copyright 2008 Cabinet Door Shop Limited Company